Stainless Steel Norma Breeze Hose Clamp 11mm to 46mm

pic_breeze_worm_gear_powerseal

$2.87$3.42

FEATURES

Highly corrosion resistant for marine use. Stainless steel band, screw, saddle and housing.

Number 1 – Design features heavy-duty four-piece industrial-aircraft construction.

Number 2 – 5/16″ slotted hex headed screw with blade driver slot for ease of installation.

Number 3 – Arcial slots give added strength against stripping.

Number 4 – 1/2″ stainless steel band, housing and saddle for ultimate durability.

Number 5 – Housing is clinched at 4 points for extra strength and stability enabling the clamp to

resist twist and housing tilt common during installation.

Clear selection

FEATURES

Highly corrosion resistant for marine use. Stainless steel band, screw, saddle and housing.

Number 1 – Design features heavy-duty four-piece industrial-aircraft construction.

Number 2 – 5/16″ slotted hex headed screw with blade driver slot for ease of installation.

Number 3 – Arcial slots give added strength against stripping.

Number 4 – 1/2″ stainless steel band, housing and saddle for ultimate durability.

Number 5 – Housing is clinched at 4 points for extra strength and stability enabling the clamp to

resist twist and housing tilt common during installation.

SPECIFICATIONS

The BREEZE worm-gear clamps with heavy duty 4-piece Quadra-Lock construction are designed for use in general-purpose, industrial & automotive applications

The BREEZE Quadra-Lock clamp is a significant upgrade from common three piece SAE worm-gear designs, delivering the ultimate in quality and value. The extra-strong “square knot” interlocking construction won’t pull apart and there are no spot welds to rust, corrode or rupture. The smooth underside insures most effective seal possible.

The re-inforced buttresses screw threads coupled with the arcial band slots create a smooth, positive worm gear engagement and the five screw threads engage in the band for increased torque strength.

The band width o torque to sealing pressure properties of Breeze Power-Seal clamps are designed to give higher sealing pressure with lower applied torque. This is especially important in the lower torque ranges, which will be typically achieved when a clamp is installed by hand with a screw or nutdriver.

Additional Information

Weight 8 g
Options

11-20mm, 13-23mm, 14-27mm, 17-32mm, 21-38mm, 21-44mm, 27-51mm, 33-57mm, 40-64mm, 46-70mm

  • SUBSCRIBE FOR THE LATEST PRODUCTS, PROMOTIONS & DEALS